Three Monitor Package Black 7" Video Intercom System with Photographic Memory

AU $1,050.00AU $735.00

Three Monitor Package Black 7" Video Intercom System with Photographic Memory

Product Price: AU $1,050.00AU $735.00

Product Code: EV-807TSSD-BK-291-3m

Slim Design 7" Video Intercom System 3 Monitor Package
Slim Design 7

The Eyevision® i-Touch 7sd is a 7” Touch Screen video intercom system which is feature packed whilst extremely user friendly.
This system is loved by all ages as it offers both an ultra modern touch screen for operation and a simple to use graphic user interface.

The unlock feature on the installed monitors allows the user to unlock a gate or door that is connected to the system.

The master monitor of the system has multi-shot photo memory which may be easily set by the user to take 1, 4 or 8 photos in intervals when a visitor rings the doorbell. This handy feature allows pictures of the visitor to be captured even if they are moving around. All pictures captured will be viewable on both the master and the slave units.

This system supports the use of a quad splitter which allows the user to view up to 3 connected CCTV cameras along with the 1 connected door station on the same screen at the same time.

Similar to all Eyevision® systems, this system may be expanded to increase communcation throughout the residence by installing up to 5 monitors in the same residence.

Up to 4 Door Stations may be installed to this system at different entry points of a residence through the use of an MDS. All 4 of these door stations can be viewed on demand by selection from the menu.

Please see below for functions of RLC, MDS and Quad Splitter.

Slim Design 7
Slim Design 7

-True Colour 7" Digital TFT Screen
-Graphic User Interface
-Night door bell volume setting to normal, low or mute (adjustable time)
-Intercom calling between installed monitors with a setup choice of all monitors calling OR a specific room
-12 Door Bell Melodies to choose from
-120MB Internal Flash Memory (Master monitor only)
-SD Card Input for added storage (Master monitor only)
-Multi Shot Photo 1/4/8 (Photos viewable on Master and Slave Units)
-Digital Photo Frame Function/Album Function (Master monitor only)

Power Supply16-24V DC
Power ConsumptionStandby: 1,2W, Working: 8W
Screen7" Digital TFT Monitor
Display Resolution:800*3(RGB)*480 Pixels
Built-in memory120MB on board (expandable with SD card input) - (Master Monitor Only)
Wiring4 Wires, polarity
Dimensions125 (H) x 225 (W) x 23 (D) mm
Door Station
Slim Design 7
- Surface mount: fits on walls, brick piers and most metal posts
- Compatible with all 4 wire eyevision® video intercom systems
- Sony high performance CCD Camera
- Adjustable camera angle
- Adjustable microphone volume
- Adjustable speaker volume
- Infared for night viewing
- Name plate with back light
Power Supply12V DC (Supplied by indoor monitor)
Power ConsumptionStandby: 50mA, Working: 200mA
Wiring4 Wire connection to indoor monitor
2 Wire connection to automatic gate or 12V electric striker
Dimensions176 (H) x 90 (W) x 23 (D) mm
Monitor Functions


Slim Design 7


Calendar Screen:

The Calendar Screen appears everytime the screen is touched when in standby. Once the screen is touched again the user will be taken to the main menu.


Main Menu:

The Main Menu which comprises of a graphic user interface is the starting point which appears consecutively after the calander screen, displaying all the monitors functions.
The monitor is touch screen making it easy to manouver through the set up and the different functions available.


Slim Design 7


Slim Design 7


Monitor Date and Time Setting:

The Relevant Date and Time may be set when the system is first installed and may be changed at any time through the date and time setup function.


Ring Volume and Night Ring Volume Setting:

Ring Volume for night time and day time may be set separetly by the user. If you don't want to be disturbed at night you can set the night volume to mute. This is adjustable at any time through the ring volume function. This system has an adjustable time function which allows the user to easily set the time frame in which they would like a certain ring volume. For example, the user may set the ring volume to mute between 10pm and 7am.


Slim Design 7



Slim Design 7


Memory Playback:

The Memory Playback function allows the user to view all pictures that have been captured and stored on the system. 4 pictures will be displayed on the screen at a time when in playback mode. All pictures will be viewable on both the master and the slave monitors.
The master monitor has 120MB built in memory with expandable SD card capabilities.

Intercom Calling Function:

The Intercom Calling Function is activated when multi monitors are installed. Intercom calling may be initiated by any of the installed monitors, allowing communication between all the installed monitors. The intercom calling function allows the user to call all monitors at once or a specified room.


Slim Design 7



Slim Design 7

Slim Design 7


Quad Function:

The Quad Function is activated when a quad splitter is installed allowing the screen to be split into 4 which in turn allows the user to view 1 Door Station and up to 3 seperate CCTV cameras which are connected to the system, on the same screen.

As seen in the screen shot on the left, the system also provides the option of viewing up to 4 connected door stations. This can be activated through the use of an MDS.

Album Function:

The Album Playback function is availble on the master monitor and acts as a digital photo frame which plays all the pictures which are present on the inserted SD card. This function allows the user to set a maximum playing time between 1-999 minutes. The amount of time set by the user determines how long the monitor will display the pictures on the SD card.


Slim Design 7


Add on Accessories


Slim Design 7


Quad Splitter:
The Quad Splitter module is designed for the purpose of quad splitting four images from 4 different cameras on the monitor of this video intercom system.
When a quad splitter is used with this intercom system it splits the screen into 4 when the quad function is accessed through the menu. This allows the user to see the connected door station along with 3 other camera's.
This module requries an external 12V DC Power Supply.

This module can be found under 4 wire accessories on our website.

The MDS module is used for the connection of up to 4 camera's to this intercom system. It allows the connection of either of the following:

- 1 Door Station & 3 CCTV Camera's
- 2 Door Stations & 2 CCTV Camera's
- 3 Door Stations & 1 CCTV Camera

This module will only allow the user to view seperate channels (not split).

This module can be found under 4 wire accessories on our website.


Slim Design 7
Slim Design 7
This intercom system supports 2 unlocking functions, one of which requires an RLC to activate it. The RLC module allows the user to unlock 2 pedestrian gates or operate 2 electric gates or one of each.

This module can be found under 4 wire accessories on our website.
Slim Design 7
Slim Design 7
Slim Design 7
Package Contents:


- 1 x Eyevision® 7" Touch Screen Master Monitor with Photographic Memory
- 2 x Eyevision® 7" Touch Screen Slave Monitors
- 1 x Eyevision® Door Station with Rain Cover
- 3 x Power Packs
- 1 x User Manual
All of the Eyevision® video intercoms are bench tested according to the buyers configurations, every customers needs are different, the extensive aging test is conducted for several hours.
All the Eyevision® products carry a 12 months warranty.
We also carry a comprehensive range of spare parts for all the Eyevision® range of video intercom systems.

Online credit cards, Telephone credit card, Pay Pal, Bank deposit, Money orders and cheques are accepted.
Please note, cheques and bank deposit will cause some delay to the order until cleared.

Delivery Method:
All order received and processed by 11.30am will be promptly processed for dispatch on the same day via Australia post regular post, all parcels are insured and registered.
Special requests of express post will incur extra charges.

Delivery Charges:
Our website will work out the delivery charges based on your post code, alternatively please feel free to call us on 03 9532 0804 to find out the delivery charge to your area.

All prices advertised are inclusive of GST.