5m Ultra Combo Sliding Gate with Flat Top Rings Design including track, rack, wheels, rollers, Powerful Sliding Gate Motor & Hybrid Intercom System Package

AU $2,051.60

5m Ultra Combo Sliding Gate with Flat Top Rings Design including track, rack, wheels, rollers, Powerful Sliding Gate Motor & Hybrid Intercom System Package

Product Price: AU $2,051.60

Product Code: GTR50-SG801AC-H7-WH-H298KP

Ultra Combo 15

- 5m Wide Sliding Gate with Flat Top Rings Design
- Gate Automation System ( APC-SG801AC Powerful Sliding Gate Motor)
- Color Video Intercom System (Eyevision® 7" Hybrid Video Intercom System)
 
 
 

Important Note:
This advertised gate including the complete automation system and accessories
are suitable for pickup and delivery due to the excessive freight cost.

PICKUP: Bring your trailer or truck with you.
DELIVERY: Please call us on (03) 9532-0804 for a shipping quote.
 
Product Code: GTR50-SG801AC-H7-WH-H298KP
 

This is a complete 5m Sliding Gate, Automation & Hybrid Video Intercom System Package allowing you to open the sliding gate via remote controls or the supplied intercom monitor.

 
 
Sliding Gate Automation System, Sliding Gate + Powerful Sliding Gate Motor Kit and Color Video Intercom System

Combo Package Contents

Gate
1 x 5m Wide Sliding Gate

Gate Opener System
1 x Powerful Sliding Motor
1 x Motor mounting base plate
1 x Exit Push Button Switch
1 x Set of PE Safety Sensors
2 x 10m Cable for PE Sensors & Exit Button
2 x Remote Controls
1 x Car Remote Control With Sun Visor Clip
5m Gear Rack
3 x 3m Metal gate track
1 x 1m Metal gate track
2 x 78mm Recess wheels
1 x Upper Rollers & Bracket set
1 x Gate stop for open position
1 x Gate guide for closed position
1 x Set of Limit Strikers
2 x Manual override keys
1 x Caution Sign

Video Intercom
1 x 7" Sleek Design Monitor
1 x Aluminium Keypad Door Station with Rain Cover
1 x 12V DC Power Adapter for Monitor
1 x 12V DC Power Adapter for Door Station
Connection Fly Leads
User Manual

Installation instructions

 
Gate:(Flat Top Rings Design)
 
Construction: Black powder coated metal gate frame featuring a strong 40mm x 40mm x 1.5mm steel frame with an 80mm strong bottom channel and additional support rail in the middle of the gate. This gate frame is designed for cladding with timber pickets, colour bond sheet, mesh and any other materials used for gate cladding. If you are after a ready made decorative type of gate which does not require cladding please see our other sliding gate packages which comprise of decorative gates with steel pickets.
 
 
Please note:This and all other advertised gates and gate frames are suitable for pickup from our warehouse in Moorabbin. Bring your trailer or truck with you. For quotes on courier delivery please call us on (03) 9532 0804.
 

Motor Features

Strong & Durable
Strong & Durable Sliding gate motor with 800KG capacity
All In One Motor
All in one motor with built-in control board and limit switches
AC Sliding Gate Automation System
AC Sliding Gate Automation System
Manual Override
Built-in manual override for emergencies
Metal Pinion & Gears (NO PLASTIC OR NYLON)
Strong Metal Cut Pinion ensuring the highest durability
AC Sliding Gate Automation System
AC Sliding Gate Automation System
 

Motor Dimensions

 
AC Sliding Gate Automation System
 

This all in one AC powered sliding gate motor kit is designed to operate sliding gates up to 800kg in weight. It is an all in one motor and control panel, making it simple to install and incredibly compact and neat.

✓ Manual Override
✓ All Metal Gears
✓ Metal Gear Drive
✓ All in one internal Motor and Control Panel

Controlling Options:

(any or all of the following may be connected to operate the gate)
- Remote Controls (2 supplied - More available upon request)
- Car Remote Control With Sun Visor Clip (1 supplied - More available upon request)
- Entry push button with isolation key switch (supplied)
- Exit push button with isolation key switch (supplied)
- Safety Photoelectric Sensors (supplied)

- Intercom system with dry contact output (optional add-on)
- GSM Dialer with separate power supply (optional add-on)
- Wi-Fi receiver with separate power supply (optional add-on)

 

Specifications

 
Rated Power450W
Power supply220V-240V
Maximum Weight of Gate800kg
Maximum Width of Gate6m
The working temperature of the motor-45° ~ +65°
Open (Close) speed12m/min
Maximum Pull22Nm
Voltage outputOnly devices with a parameter of 12-24V DC operating range can be connected to the system
Light output240V Light, 30 Watts or Less
 

Suitability

 
This automatic sliding gate opener is suitable for:
→ Sliding gate not exceeding 800kg maximum
→ Sliding gate not exceeding 6m width maximum
→ A powerpoint at the gate
→ Level ground installations
 

Remote Control

  
AC Sliding Gate Automation System Remote Control

Rolling code 433.92MHZ.
The remotes supplied have four buttons, 1 and 2 can be used for the gates. Buttons 3 and 4 can be used for the party mode and second lock or alternatively they can be programmed to a compatible second gate opener or a garage door(s).

A compatible two channel receiver is available to interface to any garage doors. Please see remotes and receivers in our store to find this add on receiver for the garage door.

 

Remote Control with Sun Visor Clip (Grey)

  
AC Sliding Gate Automation System Remote Control

Four button remote control transmitter used for APC Swing Gate Systems, Sliding Gate Systems & Boom Gate Operating Systems.

• Featuring High Security rolling codes transmitting a unique code chosen at random
• Small & Slim design
• Sun Visor Clip for Easy Car Access

  
Please note: Package supplied one grey remote control with sun visor clip. More available upon request, with four different colour options.
 

Photo Electric Sensors

  
AC Sliding Gate Automation System
APC-PE2000

Photo electric sensor function:
If PE sensors are installed:
- The gate will not close while the beam is obstructed.
- The gate will stop and re-open if an object obstructs the beam.
The sensors are wired back to the control panel using the supplied cables.
Specifications:
Detection technology: Infrared
Range: 15m max.
Frequency: 1.92Khz
Power: 12-24V AC/DC
Input: RX 15mA, TX 30mA
Operating temperature: -20 to 70 degrees
Relay output: 1Amp max 30V
Dimension: 49.2 x 76 21mm
 
 

Single Push Button Switch

  
AC Sliding Gate Automation System

Low Voltage Single Push Button Switch with isolation key switch for operating automatic gates or garage opening systems.

This switch can be wired to operate any device requiring momentary switching (switch is closed while pressed and open when not pressed).

 
 

Gate Stop

 
AC Sliding Gate Automation System Gate Stop
Gate Stop

Heavy-duty galvanised metal gate stop with a rubber end.
 

"U" Guide

  
AC Sliding Gate Automation System U guide

"U" Guide and stop for sliding gates


The "U" Guide is installed at the closing end of the sliding gate.

 
 
 

Intercom Features: EV-H7-WH-H298KP

 
Sleek Looking Ultra High Gloss White 7" Monitor coupled with a Weatherproof Aluminium Door Sation. This highly expandable system can be connected to the internet router in the home through the use of an optional accessory called a Net-Link (this net-link is not supplied in this package but can be purcahsed as an add on) which will then allow the system to ring up to four programmed smart phone or tablet devices every time the doorbell rings. Monitoring the outside of the residence and capturing a picture or small video also becomes possible from anywhere in the world when the Net-Link is connected. A total of four indoor monitors and two door stations can be connected to the system. 
 
HYBRID 4 Wire Video Intercom System
Hybrid Video Intercom System offers the best of both worlds, an easy-to-use touch screen high quality video intercom system along with the option to connect the intercom system to your Smart Phone or Tablet Device
Sliding Gate Automation System, Sliding Gate + Powerful Sliding Gate Motor Kit and Color Video Intercom System
 

How Does It Work: Without a Net-Link

When the visitor presses the call button on the door station, any connected indoor monitors will ring. The user is then able to answer the call and has all the following functions:

1. Talk to the visitor
2. Transfer the visitors call to any other installed monitor (all installed monitors will ring if the transfer button is pressed)
3. Open the door or gate

Additional to this, the user can enter a code into the built in keypad when standing at the gate OR door to open the connected door striker or automatic gate.


How Does It Work: With a Net-Link(Can be purchased as an add on to this package)

When the visitor presses the call button on the door station, any connected indoor monitors will ring. The system will also call any/all the Smart phones and Tablets programmed to the system, the user is then able to answer the call from any installed monitors inside the house or any smart phones/tablets programmed to the system and has all the following functions:

1. Talk to the visitor
2. Transfer the visitors call to any other installed monitor (all installed monitors will ring if the transfer button is pressed) - this function can be used when the user answers the call on the monitor not the smart phone or tablet
3. Open the door or gate
4. Take a video or take a picture (on the tablet or smart phone through the application)

Additional to this, the user can enter a code into the built in keypad when standing at the gate OR door to open the connected door striker or automatic gate.

The user can use the application installed on the Smart Phone/Tablet to monitor real time (LIVE) where the door station is installed. Again the user can monitor, take a video or capture a picture whilst using the application.

The APP can be downloaded FREE of charge from the Google PLAYSTORE (Android) or from the APP STORE (iPhone or iPad) (Further details in the Net-Link Description Below).

 

Net-Link

 

Net-Link is an add-on accessory which is controlled via an application called Controlcam which can be downloaded through the Google PLAYSTORE (Android) or from the APP STORE (iPhone or iPad). With this application the user can view, talk and take photos & videos on demand onto their mobile phone or tablet device. The Net-Link can be connected to the internet in either of following ways:
1. Wi-Fi Connection between the router and the Net-Link.
2. RJ45 Ethernet Cable Connection between the router and the Net-Link.
This component can be found in the Hybrid Video Intercom Systems category.

Sliding Gate Automation System, Sliding Gate + Powerful Sliding Gate Motor Kit and Color Video Intercom System
 

Wiring Diagram of Hybrid System Full Capacity

 
Sliding Gate Automation System, Sliding Gate + Powerful Sliding Gate Motor Kit and Color Video Intercom System
 
 

Wiring Diagram of Hybrid System with One Door Station, Two Monitors & Net-Link

 
Sliding Gate Automation System, Sliding Gate + Powerful Sliding Gate Motor Kit and Color Video Intercom System
 

Note About Cable

 
The recommended cable to be used with the Eyevision® Hybrid Video Intercom System is 4 Core Shielded .5mm up to 70m distance. This 70m cable distance is calculated from the outdoor station to the furthest monitor inside the home.
 

Package Contents

 

- 1 x 7" Sleek Design Monitor
- 1 x Aluminium Keypad Door Station with Rain Cover
- 1 x 12V DC Power Adapter for Monitor
- 1 x 12V DC Power Adapter for Door Station
- Connection Fly Leads
- User Manual
Please Note: Net-Link is not supplied in this package, please find Net-Link for purchase under the Hybrid Video Intercom Systems Category or see Package including the Net-Link.

 

Specifications

 
Power Supply for Monitor12V DC 1.0A
Power Supply for Door Station12V DC 1.0A
Display Resolution800*3(RGB)*480 Pixels
Camera Resolution650TVL
Camera Angle70 degrees
Communication Duration120 Seconds
Screen7" TFT Monitor
Rain CoverSupplied
Night Viewing0.1 LUX
KeypadIlluminated Mechanical Keys
IP Rating for Door StationIP 55
Door Station ConstructionAluminium
Mounting for Door StationSurface Mounted with Rain Cover
Mounting for MonitorSlip Onto Mounting Plate
Unlocking TimeProgrammable 1-99 Seconds
Compatible with Net-LinkYes (please see description above)
ConnectionsPlug-In
Compatible APPControlcam (when used with Net-Link - Please see description above)
CompatibilityIOS or Android (when used with Net-Link - Please see description above)
Monitor Dimensions:235mm (W) x 167mm (H) x 17mm (D)
Door Station Dimensions:110mm (W) x 215mm (H) x 42mm (Depth at highest point of rain cover)
110mm (W) x 215mm (H) x 32mm (Depth at lowest point of rain cover)