3.5m Complete Hardware Kit for Cladded Sliding Gate with Flat Mounted Wheels and More

AU $277.00

3.5m Complete Hardware Kit for Cladded Sliding Gate with Flat Mounted Wheels and More

Product Price: AU $277.00

Product Code: SGK-F68-35-Z-C

Complete Sliding Gate Hardware Kit for 3.5m Cladded Gate with 68mm flat mounted wheels and more
 
This is a complete sliding gate hardware installation kit with all the parts required for a 3.5m sliding gate with Cladding. This kit is suitable for sliding gates with uneven surfaces for example gates with pickets or colourbond on the face of the gate.
 
Floor Track
7 x 1m fully galvanized heavy-duty floor track.

This 1m gate track is heavy duty 3mm thick.
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
Wheels
2 x 68mm Flat mounted heavy-duty wheels with dual bearings.


The wheels are fixed on to the underside of the bottom gate frame, the wheel will raise the gate by approx 80mm from the sliding gate track.
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
U Guide
1 x 55mm U Guide gatekeeper.
This "U" Guide-stop is suitable for gates up to 55mm thick.
The "U" Guide is installed at the closing end of the sliding gate.

Complete Sliding Gate Hardware Kit for Cladded Gate with 68mm flat mounted wheels and more

Gate stop
1 x 115mm Gate stop for the open position.
Heavy-duty anodized metal with a rubber end.
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more

Sliding Gate Block with "C" Channel
1 x Nylon Block
1 x "C" Channel


This Nylon gate block and "C" channel is suitable for gates with uneven surfaces, for example, gates with pickets. The "C" channel is attached to the post and the nylon block fits into the "C" channel and to the "Z" channel which is mounted to the top of the sliding gate.

Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more

"Z" Channel
4 x 1m Aluminium "Z" Section for Sliding Gates.

This Aluminium "Z" Section is the ideal choice for gates:
- With an incline or decline (not on level ground)
- With pickets or cladding on the face of the gate making an uneven surface on the gate
- With spears at the top of the gate
- With an arched top design

Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
 

Example of how the Z Section works when installed with Block & "C" Channel

 
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
 

The following images illustrate situations when the sliding gates used are not the standard shape and the Z Section is useful

 
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
Example: Sliding Gate with Timber Cladding
A sliding gate with Timber Cladding on the face of the gate makes it difficult to use the roller and bracket set due to the uneven surface on the face of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.
Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more

Example: Sliding Gate with Colorbond Cladding
A sliding gate with Colorbond Cladding makes it difficult to use the roller and bracket set due to the uneven surface on the face of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.

Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more

Example: Sliding Gate with Spear Top
A sliding gate with spears at the top makes it difficult to use the roller and bracket set due to the gap between the top of the flat part of the gate and the top of the spears, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.

Complete Sliding Gate Hardware Kit for 3m Cladded Gate with 68mm flat mounted wheels and more
Example: Sliding Gate with Arched Top
A sliding gate with an arched top makes it difficult to use the roller and bracket set due to the top of the gate being different heights at different points of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.