24V DC Heavy Duty Linear Actuator with Built in Adjustable Stoppers Wireless Controller Kit

AU $995.00

24V DC Heavy Duty Linear Actuator with Built in Adjustable Stoppers Wireless Controller Kit

Product Price: AU $995.00

Product Code: APC-595R-DC-WCK

Wireless Controller Kit

Heavy Duty Single Gate Opener

24V DC Powered by internal transformer and with back up Batteries


Suitable for PULL to open or PUSH to open installation
With Built in adjustable limit stopper

This single gate opening system is a robust, tuff, long lasting and a quiet opening and closing system for single swing gates from 1.25m - 3m in length (non cladded gates). The motor can handle light and heavy gates. The 595R is a sleek looking European design screw type linear actuator that is made of stainless steel with a cast aluminium motor housing.

The motor has the ability to push the gates to open (opening outwards gates) or pull the gate to open (opening inwards gates) and also has a built in adjustable limit stopper for both the open and closed positions making it very easy to install and set-up.

This system is equiped with two batteries which allows the system to continue to work if the power fails, futher to this the motor has a manual key override in case of both power & battery failure.

For further powerful features please see the control panel specifications below.
APC-595R-DC-WCK single gate opener kit contents:

- 1 x Heavy Duty DC motor that is pre-wired with motor cables
- 2 x Override Keys
- 3 x Remote controls
- 1 x Wireless Entry Keypad
- 1 x Wireless Exit Push Button Switch with Isolation Key
- 1 x Set of PE Safety Sensors
- 1 x 10m 4 Core Cable for PE Safety Sensors
- 1 x Weatherproof 24V Control panel
- 2 x 12V back up batteries
- 1 x Gate mounting bracket
- 1 x Post mounting bracket
- Instruction manua
Heavy Duty Single Gate Opener
Motor Features
  • Heavy Duty 24V Motor with powerful and quiet operation
  • Sleek European design with a compact and neat appearance
  • Easy to use manual override via the supplied keys in a power failure or emergency
  • Built in adjustable limit stopper for the open and closed positions
  • Flexible motor with the ability to push to open or pull to open (open gates outwards or inwards)
  • Can handle light and heavy gates - up to 250kg maximum weight
  • Can handle a single swing gate between 1.25m and 3m max
  • Supplied with back up batteries which sit in the control panel so that the gate can still be operated in a power outage
  • Supplied with a control panel encompassing many features and accessory inputs such as connection of keypads, push buttons, safety sensors, auto close function and more (please see below for full control panel features)
  • Easy operation of motors via the supplied remote controls (additional remotes may be requested)
Heavy Duty Single Gate Opener
Emergency Override
Heavy Duty Single Gate Opener
Built in easy manual override
in case of emergenecy such as both power & battery failure.
Actuator Dimensions
Heavy Duty Single Gate Opener
Adjustable Built in Limit Stopper
Easy to set-up built in internal stop adjustments, simply un-do the screws to remove the front housing and set the stoppers for the open and closed position.
Heavy Duty Single Gate Opener
Heavy Duty Single Gate Opener
Heavy Duty Single Gate Opener
Heavy Duty Single Gate Opener
APC Smart Control Panel
Heavy Duty Single Gate Opener
APC Smart digital technology 24v DC Swing gate control panel :The smart control panel is easy to connect and easy to set up. The setup button allows the gates to run one complete cycle and automatically sets slow down for opening and closing.

Control Panel Features:
✓ Fully weatherproof with a seal
✓ Hinged door with a padlock slot for added security
✓ Over current adjustments.
✓ Adjustable Auto-Close time up to 3 minutes
✓ Party mode: The automatic closing can be cancelled using one of the remote control buttons when expecting a visitor to arrive
✓ Second gate lock opening supported for a service gate (250mA max.). This is an extra feature. Using the second lock output will allow the user to power and control a second electric striker installed on a service gate the second lock is powered and controlled from the control panel and via one of the remote control buttons.
✓ PE Sensor connection input: Energy star output, with zero consumption on standby to conserve battery power
✓ Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during closing
✓ Control Panel Power: This control panel is pre connected with a 10amp power plug and is ready to plug into a power point

Controlling options:
(any or all of the following may be connected to operate the gate)
- Remote controls
- Entry push button with isolation key switches
- Exit push button switch
- Keypads
- Exit/entry sensors
- Intercom system with dry contact output
- Automatic switching timer
- GSM switch telephone dialer
APC-RC4BK Remote control
Rolling code 433.92MHZ.
The remotes supplied have 4 buttons, 1 and 2 can be used for the gates.
Buttons 3 and 4 can be used for the party mode and second lock or alternatively they can be programmed to a compatible second gate opener or a garage door(s). A compatible 2 channel reciever is available to interface to any garage doors. Please see remotes and recievers in our store to find this add on reciever for the garage door.
Heavy Duty Single Gate Opener
Wireless Entry Keypad

Heavy Duty Single Gate Opener

APC-KP2W Wireless Keypad Features

- Low Power Consumption only 18uA in standby.
- Easy to replace AA battery powered system (supplied) with up to two years usage on general use.
- High strength tempred glass face plate with an ultra modern and highly reliable touch sensitive operation.
- Blue Backlight illumination upon touch with an automatic timeout to return to standby.
- Two Channel operation allowing the user to control two different items or functions using separate pin codes.

Channel 1 supports up to 8 Pin Numbers
Channel 2 supports up to 3 Pin Numbers

- Two dedicated LED indicators indicating and accepted pin code (green) and also security lockout (red)
- IP53 Weatherproof rated and suited for outdoor and indoor environments.
- Built in Anti Tamper alarm and security lockout to help prevent theft and unauthorized usage.
- Pin code scramble allowing the user to input a series of random number before the pin code to
prevent pin code theft.

- Touch sensitive buttons
- Tempered glass face plate
- 6V DC supply (4x AA Batteries)
- Consumption 18uA Standby, 6mA Active, 28mA Working
- Two channel output (CH1=8 Pins, CH2=3 Pins)
- LED Indicators + Backlight
- Anti tamper + Pin code scramble
- IP53 Rated

Wireless Single Exit Lockable Push Button Switch
This wireless APC single push button switch with isolation key is a stand alone unit powered by a durable 12V internal battery.
This switch is wireless and DOES NOT require any wiring or external power to operate any of the APC automatic gate openers.
Heavy Duty Single Gate Opener
PE Safety Sensors
Heavy Duty Single Gate Opener
Photo electric sensor function:
If PE sensors are installed:
- The gate will not close while the beam is obstructed.
- The gate will stop and re-open if an object obstructs the beam.
The sensors are wired back to the control panel using the supplied cables.
Detection technology: Infrared
Range: 15m max.
Frequency: 1.92Khz
Power: 12-24V AC/DC
Input: RX 15mA, TX 30mA
Operating temperature: -20 to 70 degrees
Relay output: 1Amp max 30V
Dimension: 49.2 x 76 21mm

This automatic gate opener is suitable for:
→ Single gates between 1.25m - 3m wide (non cladded gates) and not exceeding 250kg in weight
→ Free flowing gates with good hinges
→A power point near the gate (within 1m) or see other power options
Important Requirements

Power Source:
This gate opener has a built-in internal transformer placed behind the control board in the control panel, the transformer is pre wired with an AC 240 power plug, so the control panel is ready to plug-in into a standard weatherproof 10amp power point near the gate,
Other powering options of external transformer or solar systems available, call 0414 247 359 for further assistance and understanding of the powering options.
Gear TypeMetal worm gear
Power supply
240v AC to the Control Panel
Power to motor
24v DC
Battery backup
2 x 12v 5Ah (24V x 5Ah)
Manual override
Via override keys supplied
Working temperature
-20° - 50°
Duty Cycle
Operation stroke
Gates size
1.25m - 3m max
Gate weight
250kg max
RF frequencyRolling code 433.92mhz
Heavy Duty Single Gate Opener
Prices & GST:
All prices include GST.
The automatic gate operating system will be delivered via Australia post couriers, the products will be registered and insured.
The purchased product will be dispatched immediately on the day of purchase if the order and payment is completed before 12pm otherwise it will be dispatched the following day.
Customers can pickup the automatic gate opener from factory 53 Cochranes Road Moorabbin, Victoria 3189.
All the gate openers supplied are pre tested and of good quality long lasting and have a 12 Months back to base warranty on the complete system.