24V DC Extra Heavy Duty Single Swing Underground Motor with Metal Gears Trade Kit

AU $985.00

24V DC Extra Heavy Duty Single Swing Underground Motor with Metal Gears Trade Kit

Product Price: AU $985.00

Product Code: APC-UG1400C-DC-TK


24V DC Underground Swing Gate System

All Metal Gears, Underground Installation, Extra Heavy Duty 24V DC Motor

Suitable for underground installation for single swing gates up to 3.5m in width

24V DC Underground Swing Gate System
Package Contents:

- 1 x 24V DC Underground Motor (housed in powder coated foundation box)
- 1 x Control Panel
- 2 x 5Ah Back up Batteries
- 2 x Remote Controls
- 1 x Powder Coated Steel Arm with bearing
- 1 x Powder Coated Steel Drive Channel
- 3 x Bearing Height Adjusters
- Nuts & Bolts required
- 1 x Metal Gate Stopper
- Manual Release Key
- Installation Instructions
APC-UG1400C-DC/2400C-DC Extra Heavy Duty 24V DC Underground Motor
Reliability & Durability
The APC-UG1400C-DC/2400C-DC Extra Heavy Duty 24V DC motor is a powerful unit built from metal components with a thick and strong motor drive shaft unlike most competitors models. Designed in Australia, the extra heavy duty motor is for underground installation to cater for installations where there is no space above ground for mounting a motor or for installations where the user does not want the motor above ground. This system is engineered to last a long life and carries a full 12 months Warranty.

Manual Override
Easy to use manual override. Simply unlock with the manual release key and the gate will be free and can be opened manually in the case of an emergency or a power outage.

Flexible Motor
Several installation methods are available for this motor to allow for a wide range of different installations with different clearance room.

Gate Size
This Tough and Robust system can handle a large single gate up to 3.5 metres in width - Please see more details on this further in the ad.

Gate Weight
Can handle a heavy gate up to a total of 300kg maximum - Please see more details on this further in the ad.

Opening Angle
Pulling to open (opening inwards) can be set to open the gate up to 120° (if you would like your gate to open further please contact us on (03) 9532 0804 to check suitability).

Gate Opening & Closing Stops
The metal gate stopper provided in this kit should be used for the open position. When the gate opens it will stop against this metal gate stopper. A stopper or tab should also be positioned on the bottom rail of the gate or towards the bottom of the post at the closing end to allow the gate to stop in the closing position.

Please note: This gate motor can handle a single gate up to 3.5m in width but this width capacity is variable and based on the weight of the gate, the design (open frame, cladded, colour bond sheet) and the wind load. All of these factors which differ in every installation will determine the final capacity that this motor can handle for that particular installation. Please feel free to contact us on (03) 9532 0804 for further assistance if required.

Durable underground motor in Foundation box
Powder Coated foundation box to house underground motor

Drainage Hole
The drainage hole will allow any excess water to drain out to avoid build up in the motor
24V DC Underground Swing Gate System
24V DC Underground Swing Gate System
Powder Coated Arm
Powder Coated Linking Arm which connects to the motor and to the drive channel
Powder Coated Channel
Drive Channel which connects to the linking arm and to the gate
24V DC Underground Swing Gate System
24V DC Underground Swing Gate System
Motor Dimensions
24V DC Underground Swing Gate System
APC Smart Control Panel
24V DC Underground Swing Gate System
Low Consumption APC 24V Control Panel
This smart control panel is easy to connect and easy to set up. The setup button allows the gates to run one complete cycle and automatically set a slow down for opening and closing.

Fully Weatherproof Control Box
Deigned for all weather conditions, the control box is fully weatherproof with a seal. The swing hinged door on the control box allows for a compact and neat installation aswell as the option to secure the box with a padlock for added security. Multiple weatherproof cable glands for accessory and motor connection to the control box.

Remote Controls
The APC 4 button Remote Controls that are supplied can be used to operate different functions supported by the four channel control board.

Button 1 is vacant in a single gate application, allowing this button to be used in conjunction with a receiver to operate another gate or garage door
Button 2 is for opening and closing the single gate
Button 3 is for the party mode (to cancel the auto close for a particular cycle)
Button 4 is for operating a second lock (this can operate an extra lock fitted to a pedestrian gate)

PE Safety Sensor Connection
Energy star output, with zero consumption in standby to conserve power. PE Safety sensor connection is highly recommended.

Adjustable Auto-Close Timer
Adjustable Auto Close time up to 3 minutes. If automatic close is switched on, PE Safety Sensors are recommended as a safety precaution to stop the gate from closing if there is a car or object in the sensors view, these sensors can be found under the Sensors categeory on our website.

Party Mode
The automatic closing can be cancelled for a particular cycle using button 3 on any of the remote controls when expecting a visitor to arrive. For example, if expecting a visitor to arrive, number 3 can be pressed on the remote control whilst the gate is in the open position and the gate will remain open until the remote is pressed again.

Electric Lock
An Electric Lock (power on to unlock) can be installed on the gate.

Overcurrent Adjustment
Built in overcurrent adjustments allow for further adjustment to suit all gate sizes and weight.

A Wide Range of Controlling Options (these optional items and accessories can be found on our website)
Push Button Switches (wired or wireless)
Long Range Remote Control
Keypads (wired or wireless)
Safety Sensors
Intercom System
Automatic Timer (external device)
GSM Module (GSM telephone dialer)
APC Remote Controls
24V DC Underground Swing Gate System
APC remote controls with high security rolling code 433.92MHZ. Please see the 4 channel control panel features above for remote control functions.
Gate Stop
24V DC Underground Swing Gate System
Gate Stop

Heavy duty anodized metal gate stop with rubber end.
Duty Cycle50%
Power Supply240v AC to control panel
Power to Motor24V DC
Battery Back-Up2 x 12V 5Ah
Manual OverrideVia manual release supplied
Gate Size3.5m max (please see description above)
Gate Weight300kg max (please see description above)

Prices & GST:
All Prices include GST. Wholesale prices are available to genuine stockiest resellers of our products, please call our sales team to apply.
The purchased products will be dispatched via Australia post couriers, the products will be registered and insured.
The purchased product will be dispatched immediately on the day of purchase if the order and payment is completed before 12pm otherwise it will be dispatched within 24 hours during business days.
If previously arranged, customers can pick-up the purchased products from 53 Cochranes Road, Moorabbin, Victoria 3189
All the systems supplied are pre tested and are of a long lasting excellent quality with a 12 Months back to base warranty on the complete system.